Loadcell UTILCELL 770US
Doubleended shear beam load cell
5000 divisions NTEP class III and10000 divisions NTEP class III L
Versions:
– 770n: Nickelplated alloy steel construction.Protection IP 67 (EN 60529).
– 770i: Stainless steel construction.Hermetically sealed, fully welded,IP 68 (EN 60529) and IP 69K(ISO 20653)
Easy installation
Application:Tanks and silos weighing systems, weighbridges, on-board weighing
| Model | 770US | |
| Rated Capacity (lbs) | 5k, 10k, 20k, 30k, 40k, 50k, 60k, 75k, 100k, 150k, 200k, 250k | |
| Accuracy Class | NTEP III | |
| Rate Output mV/V | 3.0 ± 0.1% | |
| Total error %RO | ± 0.017 | |
| Repeatability %RO | ± 0.015 | |
| Temp. Effect on zero %S/10 0F | ± 0.011 | |
| Temp. Effect on sensitivity %S/10 0F | ± 0.0067 | |
| Zero Creep for 30min %RO | ± 0.016 | |
| Minimum dead load % Emin | 5 | |
| Service loadc % Emax | 150 | |
| Safe load limit % Emax | 200 | |
| Excitation Voltage | Recommended (V) | 10 |
| Maximum (V) | 15 | |
| Resistance | Input (Ω) | 700 ± 10 |
| Output (Ω) | 700 ± 5 | |
| Insulation (MΩ) | > 5.000 | |
| Compensated Temperature Range 0C | -10 ~ +40 | |
| Operating Temperature Range 0C | -30 ~ +70 | |
| Material | 770 i Stainlees steel – 770n Nickel alloy steel | |
| Cable Specification | ø 8.0 x 4P x 12m | |
| IP | 67 – 68 | |
